JX 2360 Trouble shooting

 

Before any action,

  • please verify wether the connections are made according the Wiring manual
  • measure the mains voltage,
  • verify wether the mains is switched on on each cabinet,
  • verify the earth connection quality,
  • verify that no diaphony appears between mains cables and clock cables (17 -> 7, 18 -> 8)
  • verify that J-Bus cable are connected in the correct way (A to 6/16 and B to 5/15)

Never forget that 2 000 V is generated

Do not hesitate to order our special pulse viewer which can help you finding a missing signal

How do you describe the observed anomaly ?

RTIL
  The RTIL flashes 4 times then stops
  When the Slave RTIL lamp break down, the master continues flashing
  R1 and R2 do not flash together
   
SFLS
  Broadcast cannot be proceed from JX5600
  Nothing happens
  One slave does not flash, but the others are OK
  The runway threshold RTIL does not flash